When It’s wintertime, the nights are colder than ever. You can’t wait to get inside, sit by the fire with a favorite book or movie on hand, and enjoy some heat from your wood stove. Because it’s not burning efficiently enough, rather emitting a lot of smoke. If this sounds like you, then read on for tips on how to keep your stove burning all night long!

The characteristic of a successful wood stove is that it’ll give good heat and burn for a long time. For this, you should first be careful in choosing the right stove. In this article, we’ll discuss some tips that will help your stove to burn overnight and give the expected heat.

How to Keep a Wood Stove Burning All Night?

First, make sure you and your home are safe. The safety of you and your home is of course the most important. Then you need to make sure that your wood-burning stove doesn’t pose a fire risk overnight.

Whether your stove is a pellet stove, wood, or fireplace, you need to choose the right place to get good heat and install it. Your chimney should be cleaned at least once a year and any potentially flammable items should be removed from your fireplace before leaving the stove for the night.

Any potentially flammable items should be removed from your fireplace before leaving the stove for the night. Here discussed some steps on how to keep a wood stove burning all night.

1. Choose the Right Wood

To get a wood stove to burn all night you need to have to take the right step. It’ll burn all night so be careful in choosing wood first. This will require a fairly regular size and solid wood. Green or moist wood will give more smoke than heat. So you need to use dry wood or seasoned wood.

Hardwoods like oak and maple are the best for burning all night, as they burn slowly and evenly. Softwoods like pine and cedar burn quickly and can cause your fire to go out.

how to keep a wood stove burning all night

2. Build a Hot Fire

Before you go to bed, build up a good bed of hot coals. This will help keep your fire going all night.

3. Choose the Right Size of Wood

The best thing about waking up with a wood stove is the hot embers waiting for you to start burning in the morning. If you find no hot embers in your firebox in the morning, you have been loading your stove at the wrong time and temperature and in the wrong pattern.

All you have to do is load the stove completely. For this, you need to choose different sizes of wood so that the pot is full all around. This is very important for balance combustion.

4. Close Off the Damper

When you have the logs set up, you can close the door of the stove gently so the logs don’t fall. If there is less oxygen inside your stove, the wood will burn slowly in the stove. Now close off the damper, located on the stove, to reduce the amount of oxygen available to the burning wood. It’s will reduce air going into the stove and help the stove wood burn slower.

Closing the damper all the way will snuff out your fire. Leave it open just a crack so that air can circulate and keep the fire going.

5. Add Some Logs

Add one or two large pieces of wood. Since you are trying to keep the fire burning all night, you should add logs that are going to take a while to burn. Here you can add hard, and big logs. Generally, round logs are used, instead of split wood, as these burn slowly. The object is to keep a slow burning throughout the night.

You can re-open the damper in the morning to let in the air and get a nice fire for the day. In the morning open the damper and add seasoned wood to restart the fire. Glowing embers at the bottom of the firebox quickly ignite dry wood. If embers are nearly extinguished, add some kindling before adding larger pieces of wood.

5. Cool Off the Stove

To get a wood stove to burn all night you need to have to take the right step. Many times a wood stove will not burn all night. So you should start letting the wood stove burn down and cool off in the early afternoon and evening.

Coals always form from burned wood creating glowing embers at the bottom of the firebox. Keep a steady fire going throughout the evening by adding some new woods regularly before the coals have been extinguished.

One thing to keep in mind, you should be careful when choosing wood for slow-burning. Fresh-cut wood is still wet, even if it looks dry and it does not burn efficiently. To speed up the drying time, split the large logs, and let them sit in good ventilation for 6 to 12 months. Avoid large logs if you’re buying firewood.

6. Check on Your Fire During the Night

Check on your fire during the night. Every few hours, open the door and check on your fire. If it looks like it’s going out, add a few more pieces of wood.

This method will keep your wood stove burning for a long time and keep your house warm.

How to Clean a Wood Stove Chimney?

There is no substitute for regular cleaning and maintenance to increase the heat stability of your wood stove. The most important thing in the case of stove cleaning is the chimney clean. The chimney should not be neglected, as it is the lung of your stove.

A good idea is to have an expert inspect it; they’ll let you know where there are problems that might cause chimney fires or leaks in your home’s structure. However, when not possible, here are some tips about how homeowners can clean their chimneys-

First, take a good look at the inside of your chimney. You might be able to inspect it from the bottom either by looking up with a flashlight or through an opening in your roof and then shining light down on you while inspecting it using mirrors.

The best view is had when standing above where the fireplace is located-but make sure not to use ladders because they can fall apart if used improperly! To have this vantage point without having to climb any stairs, stand one ladder below where somebody would normally go into their attic (with three rungs).

From there shine lights both upwards and downwards simultaneously until you examine everything visible before moving on to another section of inspection for safety purposes.

From above or below, you will want to check for damage such as creosote build-up and flue wear. Work from above with the damper open and chimney cap removed, thread on the first rod.

Insert the brush into the glue and push it down as you go scrubbing up and down until reaching the bottom. once there remove all creosote seen by looking inside for remaining buildup which should be scrubbed away if any is present or repeat the process of inserting rods/scrubbing until clean.

Once done vacuum soot off the floor below that has fallen in during the cleaning process. If you are not comfortable doing it yourself, call a professional. Don’t take the risk.

Can You Sleep With a Wood Burning Stove Overnight?

If you have a wood burning stove, you may be wondering if it is safe to leave it on overnight. The answer is yes, but there are a few things you should keep in mind. First, make sure that the flue is open so that the stove can vent properly. Secondly, keep a fire going in the stove so that it stays hot enough to burn off any moisture that may build up. Lastly, make sure that you have a carbon monoxide detector in the room where the stove is located, just to be safe.


Q. How Do You Keep a Fire Burning in a Wood Stove Longer?

A. One way to keep a fire burning in a wood stove longer is to use larger pieces of wood. Another way is to use a stove damper to regulate the amount of air entering the stove, which can help to control the rate of combustion.

Q. What Type of Wood Should I Use in My Wood Stove?

A. The best type of wood to use in a wood stove is hardwood, such as oak or maple. Softwoods, such as pine, can also be used, but they will burn more quickly and produce less heat.

Q. How Often Should I Clean My Wood Stove?

A. You should clean your wood stove at least once a year, or more often if needed. ashes and soot can build up on the stove and cause problems if not removed.

Q. What Should I Do if My Wood Stove is Smoking?

A. If your wood stove is smoking, it could be because the damper is not properly regulating the amount of air entering the stove. It could also be because you are using too much wood or the wrong type of wood.


Wood stoves are a great way to stay warm during the winter. But they can be tricky to maintain. If you want your wood stove burning all night long, make sure that you have proper firewood and properly maintain it by adding new logs as needed.

Also, make sure there is enough air circulation around the hearth area of the stove. We hope these tips have given you an idea of how to keep your wood-burning appliance running smoothly!